Pramac LUCE MCPH P7 - Page 17

ENGLISH 17

RISK
Themodulemustbeinstalledtakingintoaccountitsthermalfeatures.Inorderto
guaranteeairflowaroundthemodule,sufficientroommustbeprovided between
thepanelandthemountingsystem.Thisroomwillallowheatdissipationandwill
limit the creation of condensation and humidity. Furthermore, to avoid
mechanicalfailures,modulesmustbespacedtoallowthermalexpansion.

RISK
The structure on which the modules (or a  single module)shallbe mounted must
have resting points that are perfectly coplanar between themselves. When
tightening clamps orbolts forassembly, absolutely avoid applyinga torquethat
mayriskbreakingthemodule(se epoint5ofmountingprocedure).

RISK
Partial shading on modules must be absolutely
avoided, in particular a shading area which is parallel
tothecellsmayleadtoanirreversibledamageof
themodule.









photovoltaikforum.com