■ 14 Further information
72
14.3.3 Density determination “Liquid mode”
The density of a liquid is determined using this method of weighing.
The procedure is exactly the same as with the density determination
by the “Solid in air” method. A glass object with a volume of 10 cm
3
or 100 cm
3
is used as the solid (available as accessories, see
Chapter 13 “Accessories”).
14.3.4 Density determination “Solid porous mode”
The density of a porous solid is determined with this method of weig-
hing.
In order to carry out such measurements, you will require the Density
Determination Kit (see Chapter 13 “Accessories”). The instruction
manual supplied with this kit describes the procedure for the density-
measurement.
To Next Page
Loading...
