Installation and Operation Manual
1311 East Franklin Road, Suite 102
Meridian, Idaho 83642
Support: 1-888-254-1634
www.PreCiseMRM.com
a subsidiary of FORCE America
Copyright 2017
Sales: 1-888-449-0357
Wake Interval
The wireless sensor (WTS-01) will “wake up” and determine if its paired display is on,
based on sensing movement via the built-in accelerometer and periodically based on
the wake interval. The wired sensor (TS-01) will report as long as it has power,
regardless of this setting. Once the interval is selected, the setting is saved until the
next time it is changed. The default interval is 10 minutes. Increasing the interval
(say from 10 minutes to 20 minutes) can increase the battery life. If the WTS-01
sensor is not consistently waking up due to motion, the wake interval can be reduced
to enable a faster response when the display is powered, at the expense of reduced
sensor battery life.
• Hit the MENU button.
• Use the UP (▲) and DOWN (▼) buttons to underline “Wake Interval”.
• Hit the SELECT button, then increment or decrement the interval with the UP (▲)
and DOWN (▼) buttons. Hit SELECT again. This will take you back to the main
display screen.
To Next Page
Loading...