Display Parameter
Setting Range
Unit Default Remark
RP.TM Response Time
0 to 10 (number of 10ms intervals)
ABS 0 Option
COM.P
BAUD
PRTY
SBIT
DLEN
ADDR
Communication
Protocol
PCC0, PCC1, Modbus ASCII,
Modbus RTU
ABS PCC0 Option
Baud Rate 600, 1200, 2400, 4800, 9600, 19200 ABS 9600 Option
Parity
None, Even, Odd
ABS None Option
Stop Bit
1, 2
ABS 1 Option
Data Length
7, 8 (not used when set for MODBUS)
ABS 8 Option
Address
1 to 99 (maximum of 31 connected at once)
ABS 1 Option
Communication Group Parameter Summary
PD570 Series Nova Process and Temperature Limit Controller Instruction Manual
28
To Next Page
Loading...
Need help?
General