Precision Gold N73BZ - Electrical Specifications

4
Specifications
Electrical Specifications:
Function Range Accuracy
200mV,
±(0.5% rdg + 3d)
DC Voltage
2V, 20V, 200V, 600V
±(1.2% rdg + 3d)
2V, 20V
±(1.0% rdg + 8d)
AC Voltage
40-400Hz
200V, 600V
±(2.3% rdg + 10d)
200µA, 2000µA
DC Current
20mA, 200mA
±(2.0% rdg + 8d)
200µA, 2000µA
AC Current
20mA, 200mA
±(2.5% rdg + 10d)
200Ω ±(0.8% rdg + 5d)
2kΩ, 20kΩ, 200kΩ ±(1.2% rdg + 5d)
2MΩ ±(5.0% rdg + 5d)
Resistance
20MΩ ±(10.0% rdg + 5d)
Max input voltage: 600V AC/DC
Diode test: Test current 1mA max., open circuit voltage of 1.5V
typical
Continuity check: Audible signal if the resistance is <150Ω
Display: 2000 count 3½ digit LCD
Over range indication: LCD displays “OL”
Polarity: Minus (-) sign for negative polarity.
Low battery indication: “BAT” symbol indicates low battery condition
Input Impedance:
>7.5MΩ (Vdc & Vac)
AC Response : Average responding
ACV Bandwidth: 50Hz to400Hz
Auto power off:
15 minutes (approximately)
Fuse:
mA, µA ranges; 0.2A/500V fast acting resettable
fuse