1PM-1440-2SM 8-2023 Copyright © 2023 Quality Machine Tools, LLC
Heavy duty VFD gap-bed machines with 3HP motor
Large bore spindle: 2 inch clearance
D1-5 camlock spindle mount
Adjustable runout 3-jaw chuck with reversible jaws
2SM Choice of 16 spindle speeds, 60 to 1800 rpm
2SM-V Smoothly variable spindle speed from 30 to 400 & 135 to 2000 rpm
Inch threads from 4 to 112 TPI, metric threads from 0.1 mm to 7 mm pitch
40 in. between centers, 14 in. swing over bed, 19-1/2 in. over gap
Weight, including cast iron stand 1600 lb net
PM-1440-2SM-V Includes 8-inch 3-jaw chuck (reversible jaws,
adjustable runout), foot brake, coolant system & work light. Op-
tional 2-axis DRO shown here. Inset: PM-1440-2SM front panel.
PM-1440-2SM Lathe PM-1440-2SM-V Lathe
and
NOTE: Aside from the drive systems, the two lathes described in this manual
are identical, and are referred to generically in most cases as PM-1440-2SM
To Next Page
Need help?
General
