Precision Pro NX9 User Manual

SLOPE/NON-SLOPE
1. Open the battery door by sliding the panel away
from the eye piece.
2. Remove the old battery and insert the new battery
to match the image shown inside. Put the battery
door back on and secure tightly.
3. Check the viewfinder to make sure the battery is
fully charged and operating correctly.
4. Double check that the battery door is on securely.
CHANGING THE BATTERY

Precision Pro NX9 Specifications

General

Type	Laser Rangefinder
Magnification	6x
Accuracy	±1 yard
Display	LCD
Water Resistance	Yes
Slope Technology	Yes
Objective Lens Diameter	22mm
Battery Type	CR2 3V
Weight	6.5 ounces