PAN OVER TARGET: For the best results, pan the
crosshair over the target slowly as you measure the
distance.
PRESS AND RELEASE: When measuring distances,
it’s important to press and then release the green
power button.
Holding the button will not work correctly.
DON’T COVER THE LENS: Make sure the front of
the rangefinder is unobstructed. A finger or side of
the palm will interfere with the laser and result in
inaccurate measurements.
USE BOTH HANDS: Stabilize the rangefinder by
using both hands and steady your arms by bracing
them against your chest.
BEST PRACTICES
To Next Page
Loading...
