Rangefinder quickstart GUIDE
Point the aiming circle at the
target -- flag, tree, bunker, etc. --
then press the POWER button
to “shoot your target.”
5:
Rangefinder quickstart GUIDE
The distance will appear on
the screen.
6: Press the MODE button to see the
Front-Center-Back measurements
on the GPS Screen.
(Press the MODE button again to return
to the Laser Screen.)
7: The Rangefinder’s Screen will turn
o after 8 seconds of inactivity.
The bluetooth connection will
disconnect after 30 minutes
of inactivity.
8:
To Next Page
Loading...
Need help?
General
