Precor EFX 835 - Page 22

20 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 885 / 835 / 815
Fasteners Quantity
Bushings 2
Link arm caps 2
Pivot arm caps 2
Pivot axle caps
Upright support covers (right-hand and left-hand sets,
packaged separately)
Required Tools
 #2 Phillips screwdriver
 Rubber mallet
 SAE standard hex wrench set
 SAE standard socket set
 Two ⁹₁₆-inch wrenches (open-end and box-end)
 Wire cutter