Precor P62 Installation Guide

p
Checklist items
p
Install the console based on the information on the other side of this sheet.
p
Verify that the Ethernet patch cables from the floor or wall cannot become caught
on the equipment’s moving components (Not applicable for wireless connections).
p
Verify these motion control operations work:
n
Elevation and speed
n
Resistance (Bikes, EFX, AMT)
p
When using the internal TV tuner scan TV channels, then:
1. Verify that available channels match the channel list.
2. Rename the channels if necessary.
3. Set the default channel, if applicable.
To install the set-top-box receiver, see the Media Adapter Guide.
p
Touch GO, then verify these operations:
n
Channel up/down controls
n
Volume up/down controls
n
Channel changes on the channel list
n
USB connection (only for charging a personal media player and updating
Preva software)
n
Headphone jack
n
STOP button and emergency stop lanyard (TRM only)
p
Verify that the heart rate display works:
1. Begin exercising on the equipment and grasp both touch-sensitive handle-
bars. The heart icon flashes while the heart rate is read. You must maintain
contact with both metal plates on each handlebar to ensure an accurate read-
ing. Within ten seconds, your heart rate number appears in the HEART RATE
(HR) display.
2. Perform the following checks if a number does not appear:
1. Verify that the HR cable is properly connected.
2. Repeat the test with a different person. In rare instances, it may not
work properly for a few individuals.
3. Repeat this test using a chest strap or a wireless pulse simulator.
You’ll get better results than if you grasp the touch-sensitive handle-
bars. DO NOT hold onto the handlebars during the reading or you’ll
override the HR results.
p
Verify the microSD card is securely inserted.
p
When a TV coaxial cable is connected to the internal TV tuner ensure that the
coaxial cable is securely installed by using a 7/16 open wrench to fully tighten the
cable to the console.
p
Verify IP connectivity. Go to SystemSettings > Connectivity. The IP address field
should be populated (10.15.80.90, for example). Then, to register the equipment,
make sure you have this information:
n
Location code
n
Precor technician account name and password
n
Serial number from the base
n
Friendly name assigned to the equipment by the facility (Example: Equipment
Type-Floor-Row-Number)
To complete registration for Preva-networked facilities:
1. Enter the Preva® server name (na.preva.com for all sites).
2. Enter the assigned account name and password.
3. Follow the onscreen instructions to register the product.
p
Ask the facility’s Preva administrator to log on to Preva Business Suite and confirm
that all P62-based equipment appears there.
©2021 Precor Incorporated | PN 304148-101 Rev. C ENU | 22 October 2021 | 2

Precor P62 Specifications

General

Brand	Precor
Model	P62
Category	Music Mixer
Language	English