Treadmills - Quick Installation Guide
To install the correct treadmill model you must complete the following required steps as outlined below:
• Match the correct base to the correct console
• Program the console (if necessary) to complete the set up
TRM 211
BASE
BASE PART #
BASE SERIAL # PREFIX
No other set up steps required
TRM 223
BASE
CONSOLE
BASE PART #
CONSOLE PART #
BASE SERIAL # PREFIX
CONSOLE SERIAL # PREFIX ADJB
No other set up steps required
TRM 243
Required hardware matching
BASE
CONSOLE
BASE PART #
CONSOLE PART #
BASE SERIAL # PREFIX
CONSOLE SERIAL # PREFIX
Required console setup steps
• Turn on unit
• Touch START
• At the Initialize your Equipment screen touch NEXT
• Touch the UP AND DOWN ARROWS to select TRM 243
• Touch NEXT to save your selection
• At the Date screen use the UP AND DOWN ARROWS to enter the current, date. Use the LEFT AND RIGHT ARROWS to
move between fields
• Touch NEXT to save your selection
• At the Time screen use 12 HOUR / 24 HOUR button and the UP AND DOWN ARROWS to enter the current time. Use the
LEFT AND RIGHT ARROWS to move between fields
• Touch NEXT to save your selection
• At the Unit Preferences screen use the UP AND DOWN ARROWS to select either kilometers or miles
• Touch NEXT to save your selection
• Review the information at the Equipment Settings screen for accuracy
• Press SAVE
To Next Page
Need help?
General
