Need help?Do you have a question about the Precor ENERGY SERIES and is the answer not in the manual?
Provides general product details, software diagnostics, maintenance, inspection, and adjustment procedures.
Details approved and prohibited lubricants for mechanical components and the deck/belt.
Specifies input power needs, facility requirements, and grounding instructions for safe operation.
Explains the importance of proper grounding to prevent warranty voiding and ensure safety.
Identifies the various controls and displays on the treadmill console.
Procedure to view the treadmill's total distance and operating time.
Procedure to change the unit of measurement displayed on the console.
Lists diagnostic and calibration programs accessible in service mode.
Step-by-step guide to enter the service mode on the treadmill console.
Procedure for calibrating the treadmill incline motor and system.
Lists common issues related to AC power supply and their potential symptoms.
Provides steps to check facility AC input wiring for correct setup.
Specifies the conditions under which to measure AC input current for belt/deck assessment.
Guidance on establishing baseline current readings for different belt/deck wear levels.
Recommendations for tools to accurately measure AC input current draw.
Identifies specific tools recommended for AC current measurement.
To Next Page
General