Need help?Do you have a question about the Precor Experience 700 line Series and is the answer not in the manual?
Manual covers TRM700-16/18 Experience Series 700 line treadmills.
Essential safety rules and precautions to follow during servicing.
Information on identifying model and serial numbers for the equipment.
Specifies torque values for various system components and fasteners.
Details the power requirements for 120 VAC and 240 VAC models.
Procedures to verify machine operation and readiness for service.
Lists service access codes for different console types and their functions.
Instructions on accessing service menus for LED consoles.
Step-by-step instructions for bringing systems into specification.
Procedure to verify and adjust drive belt tension.
Procedure to verify and adjust running belt tension.
List of step-by-step instructions for removing and installing components.
Procedure to remove and install the hood cover.
Wire diagram for the Motor Controller (MC).
Procedure to replace the drive motor.
Instructions for replacing the running belt and deck.
Procedure to verify and calibrate the lift motor and incline system.
Steps to remove the lift platform from the treadmill assembly.
Overview of the troubleshooting process and best practices.
Running diagnostic tests to isolate hardware issues.
How to view and interpret logged error codes.
Explains the different ASL states and their meanings.
List of procedures for troubleshooting treadmill system issues.
Troubleshooting steps when the facility outlet breaker trips.
Troubleshooting power issues for machine-powered consoles.
Information on the belt rating parameter and its meaning.
Details on scheduled preventative maintenance tasks.
Highlights new features and differences in the TRM700-16 models.
Overview of the system wiring diagram for the treadmill.
List of parts with bubble numbers and descriptions.
General safety notices and warnings.
To Next Page
General