Active Status Light (ASL)
Active Status Light: similar to Treadmill ASL, except that operation has been changed for self-
powered machines. A separate microprocessor and software on the LPCA control the color
and flashing of the LED. A button near the light is used to wake up the entire system tem-
porarily to check its color, and to clear the status color if pressed long enough. Active Status
Light processor receives simple commands from the Console, see " Active Status Light (ASL)"
on pageî175.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 218
9 Theory of Operation
To Next Page
Loading...
Need help?
General