Precor Experience 700 line Series - Trim Landing Covers Replacement

Trim Landing Covers Replacement
Trim Landing Covers Replacement
ID Description
Trim Landing Cover- left
Trim Landing Cover - right
Trim End Cap - left
Trim End Cap - right
Removal Instructions
The same procedure applies to both the left and right trim landing covers.
1. Remove the hood cover, see "Hood Cover Replacement" on page72.
2.
Remove the left and right trim landing cover #3 Phillips screw (2x), washer (2x),
and bushing (2x) fastener hardware. Retain part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 75
6 Replacement Procedures
Covers and Panels Replacement