Precor Experience 700 line Series - Motor Controller (MC) Replacement; About

Motor Controller (MC) Replacement
About
This procedure provides instruction to replace the Motor Controller (MC
1
).
The Motor Controller (MC), is located in the Drive Motor compartment at the front of the tread-
mill under the hood cover.
ID Description
Motor Controller (MC)
Lift Motor
Drive Motor
Line Filter
Power Entry Assy Module
1
Motor controller or motor controller module
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 101
6 Replacement Procedures
Motor Controller (MC) Replacement