Precor Experience 700 line Series User Manual

Understanding the error code data result
The touchscreen console (P62, P80, and P82) CPA Event Log provides the same error code
data found in the LED console (P10, P30, P30i and P31) Error Log plus the event occurrence
date & time information. The error code "CPA ERROR" identifier indicates that this is a
machine fault error code that can be used along with the Error Code Troubleshooting Guide to
help resolve the issue.
Typical CPA Event Log data:
l Error Code Data
o
Event Time & Date Stamp
o
Error Code Number
o
Error Code Description
o
Odometer
o
Hours
o
Motor Current*
o
.Input Line Current*
o
Input line voltage*
o
Buss Voltage*
o
OEM Factory only data
Note: * machine dependent parameter.
Removing Error Codes
Unlike the Error Log used on LED consoles (P10, P30, P30i and P31), you cannot manually
delete (clear) error codes from the touchscreen console (P62, P80, and P82) CPA Event Log
or the Event Log.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 173
7 Troubleshooting
Error Log & CPA Event Log

Precor Experience 700 line Series Specifications

General

Brand	Precor
Model	Experience 700 line Series
Category	Treadmill
Language	English