4. Increase the speed to 6 mph (10 kph) verify tracking, then increase the speed to 9 mph
(14 kph) verify tracking, and finally increase the speed to 12 mph (19 kph) and verify
tracking. Make sure that the tracking remains centered at each speed, make small
adjustments as needed.
5. Make sure that the treadmill is setting level and stable, adjust the two rear leveling feet
as necessary.
Note:An unlevel unstable treadmill can cause tracking issues with use.
6. Replace the hood and left/right trim landing covers, see "Covers and Panels Replace-
ment" on page70.
7. Verify treadmill operation (see "Operation Verification" on page19) and return to ser-
vice.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 60
5 Adjustment Procedures
Running Belt Tension and Tracking Adjustment
To Next Page
Loading...
Need help?
General