Treadmill Safety Features
13
CAUTION: When you work out, ALWAYS attach the
safety clip to your clothing. A position near your waistline
normally works best.
If the stop key is removed during exercise, perform
the following steps:
1. Reattach the safety clip if necessary.
2. Insert the stop key into the recess on the STOP
switch, returning it to its normal position.
3. Wait for the treadmill to reset itself.
Note: If the stop key is removed from the STOP
switch, all information about the current workout is
deleted.
4. Start the workout from the beginning, reducing the
time as needed to account for the amount of
exercise that has been completed.
Figure 5: Attaching the safety clip
To Next Page
Loading...
Need help?
General
