Precor RBK 815 - Programming Mode Navigation

14 Product Owner's Manual
Changing the Product Settings
You must be in the Programming mode before you can
change the settings.
To access the programming mode:
1. At the Precor banner, press the following keys in
sequence without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note: A PAUSE/RESET key appears on some products
and functions the same as the RESET key.
The programming prompts appear sequentially and in a
menu format.
ENTER
CLEAR
1
2
3
45
6
7
8
9
0
DISTANCE
PAC E
AVERAGE SPEED
PAUSE/
RESET
OK
2
Figure 3: Keys used in programming mode