RBK 815 Recumbent Cycle
Page 1
RBK 815 Bicycle
Warning: This service manual is for use by Precor trained service providers only.
If you are not a Precor Trained Servicer, you must not attempt to service any Precor
Product; Call your dealer for service.
This document contains information required to perform the majority of
troubleshooting, and replacement procedures required to repair and maintain this
product.
This document contains general product information, software diagnostic procedures
(when available), preventative maintenance procedures, inspection and adjustment
procedures, troubleshooting procedures, replacement procedures and electrical block
and wiring diagrams.
To move directly to a procedure, click the appropriate procedure in the bookmark
section to the left of this page. You may “drag” the separator bar between this page
and the bookmark section to change the size of the page being viewed.
To Next Page
Need help?
General
