RBK 815 Recumbent Cycle
Page 7
Quarterly Maintenance
1. Remove the cover.
2. Thoroughly clean inside the bicycle. Use a vacuum cleaner and damp rag to
remove all the dust belt particles, etc.
3. Check the belt tension of both belts per Procedures 5.1 and 5.2.
4. Replace both covers.
On-Site Preventive Maintenance (Service Technician)
When you are called to service a RBK 815 perform these preventive maintenance
activities:
• Perform the software diagnostics. Check LED and keypad function. Record the
odometer reading. See Procedure 3.1.
• Visually inspect the drive belts for cracks, fraying or excessive wear.
• Visually examine all wires and check connectors and wire connections. Secure
connections and replace wiring as necessary.
To Next Page
Loading...
