RBK 815 Recumbent Cycle
Page 12
Procedure 3.3 - Selecting Club Settings
Procedure
This procedure allows you to change the following club settings:
• Select Language
• Select Units
• Set Max Workout Time
• Set Max Pause Time
• Set Cool Down Time
• Set Resistance Range
Procedure
1. Pedal the bicycle or install an optional external power supply.
2. With the banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially.
3. Use the p,q keys to move to the desired display shown in the list above.
4. DIAGS-SET CLUB PARAMETERS will scroll across the display.
5. When SELECT LANGUAGE is displayed. Press the OK key.
6. Use the p,q keys to toggle between the available languages.
7. Press the CLEAR key to exit the select language display.
8. SELECT UNITS display. Press the OK key.
9. Use the p,q keys to toggle between U.S and METRIC measurements.
10. Press the CLEAR key to exit the set units display.
11. SET MAX WORKOUT TIME display. Press the OK key.
12. Use the p,q keys to select the maximum time a user can remain in a program.
13. Press the CLEAR key to exit the set max. workout time display.
14. SET MAX PAUSE TIME display. Press the OK key.
15. Use the p,q keys to select the maximum time a program will remain in the pause
mode.
16. Press the CLEAR key to exit the set max. pause time display.
17. SET COOL DOWN TIME display. Press the OK key.
18. Use the p,q keys to select the cool down time.
To Next Page
Loading...
