Precor RBK 815 - Procedure 3.1 - Accessing the Diagnostic Software

RBK 815 Recumbent Cycle
Page 8
Procedure 3.1 - Accessing the Diagnostic Software
The diagnostic software consists of the following modes:
• Display Test
• Keyboard Test
• Heart Rate Test
• Machine Test
Procedure
1. Using the RESET key and the numeric keypad, press keys RESET,5,1,7,6,5,7,6,1,
sequentially.
2. Hardware Validation will scroll across the display followed by DISPLAY TEST.
Diagram 3.1 - RBK 815 Display
Reset Key
OK Key
Numeric Keypad
Clear key