RBK 815 Recumbent Cycle
Page 5
Required Tools and Equipment
The following is a summary of the tools and equipment that may be required when
you service a Precor RBK 815 Upright Cycle.
Tools
Phillip and flat-head screwdrivers
Standard and metric allen wrench set
Open-end wrench set
1-1/8 inch thin open end wrench
Socket wrench set
Rubber mallet
Snap ring pliers
Torque wrench
20030-119 secondary sheave tool
Park Tool CCP-22 crankarm puller or equivalent (available at bicycle shops)
Kent Moore BT-33-73Fdrive belt tension gauge or equivalent
Equipment
Anti-static kit
Digital multimeter
Supplies
Cable ties
To Next Page
Loading...
