Removal Instructions
1. Position the crank arm and right pedal to the 12 o'clock position.
2. Remove the pedal mounting bolt using an 8 mm hex key. Retain part(s) and/or
fastener(s) for installation.
3. Use a crank puller (recommended PN X-Tools Crank Extractor or similar tool) to
press the pedal out of the crank arm and remove. Attach the crank extractor to the
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 122
5 Replacement Procedures
Pedal Replacement
To Next Page
Loading...
