Need help?Do you have a question about the Precor SPINNER CHRONO POWER and is the answer not in the manual?
General| Type | Indoor Cycling Bike |
|---|---|
| Resistance | Magnetic |
| Frame Material | Steel |
| Weight Capacity | 350 lbs |
| Adjustable Seat | Yes |
| Adjustable Handlebars | Yes |
| Display | LCD |
| Console | Yes |
| Q-Factor | 158 mm |
| Crank Arm Length | 170 mm |
| Power Measurement | Direct Power Measurement |
| Pedals | Dual-sided SPD and Toe Cage |
| Console Metrics | Calories, RPM, Distance, Time |
| Connectivity | Bluetooth |
| Drive System | Belt |
Explains the purpose and scope of the service manual.
Summarizes the key topics covered in the service manual.
Lists additional resources for servicing and maintenance.
Provides essential safety rules to follow during operation and service.
Describes bike orientation and lists required service tools.
Details system specifications and bolt grade markings.
Emphasizes using OEM replacement parts for warranty and safety.
Explains the function and use of the optional AC adapter.
Outlines approved lubricants and cleaning methods.
Specifies minimum spacing between bikes for safe operation.
Explains the importance of verifying bike operation after maintenance.
A detailed list of steps to confirm the bike is functioning correctly.
Introduces step-by-step instructions to bring components into specification.
Details the automatic calibration process for power measurement accuracy.
Provides instructions for correctly setting the brake pad-flywheel gap.
Guides on adjusting drive belt tension and alignment for optimal performance.
Explains how to adjust the generator belt tension.
Instructions on how to level the bike for stability and proper use.
Procedure for checking and replacing the bike's battery.
Instructions for removing and installing belt guard covers.
Covers replacement of brake pads and caliper assemblies.
Details replacement of drive belt, generator belt, and flywheel.
Instructions for replacing handlebar assembly and adjustment knobs.
Covers replacement of LPCA board and Data COMM cable.
Procedures for replacing pedals and crank arms.
Instructions for replacing the seat, slider, and post.
Covers replacement of front and rear stabilizers.
Outlines the troubleshooting process and initial validation steps.
Explains how to access and use console menus for diagnostics.
Describes the meaning and states of the ASL indicator light.
Covers accessing, clearing, and exporting error logs.
Directs users to specific troubleshooting guides for system issues.
Identifies and provides solutions for belt drive-related problems.
Addresses problems with resistance knob functionality.
Discusses causes and solutions for inconsistent wattage readings.
Troubleshoots issues where bikes go missing from leaderboards.
Guides on how to inspect for and resolve bottom bracket looseness.
Explains the importance of PM for equipment longevity and warranty.
Directs users to PM guides and instructional videos.
Introduces the availability of exploded view diagrams and parts lists.
Visual representation of all bike components and their part numbers.
A detailed list of all part numbers and descriptions.
Differentiates between console types used on different bike models.
Details features and operation of the Spinner Chrono console.
Describes features and operation of the Spinning Studio console.
Provides publication details, title, and part number of the manual.
Lists online resources and copyright information.
Lists registered trademarks and intellectual property rights.
Outlines the terms and conditions of the product warranty.
Explains warning and caution symbols and service safety.
To Next Page
