Specialized Tools
Tool Part Number Qty
Magnetic Gap
Fixture kit*
PPP000000058248101 1*
Cable Puller
(fish tape)**
General purpose** 2
Note: *Each Magnetic Gap Fixture kit contains two (2x) Magnetic Gap Fix-
ture tools.
Only one kit is required to complete the brake pad adjustment.
**A length of rope and tape could be used instead of a cable puller. Tape
the rope.
to the end of the cable and pull the rope/cable through the frame weld-
ment.
Parts
QTY Part Number Description Image
2 PPP00RX2809393M000 Push Mount Cable Tie
4 General purpose Cable Zip Tie (6- 8 in)
Procedure
Review entire procedure before starting.
Removal
1. Remove front and rear belt guard covers, see "Belt Guard Cover Replacement" on
page47.
2. Cut the four cross member cable-ties (4x) that secure the Data COMM, strain gauge,
generator, and battery cables to the cross member. Discard the cable ties.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 73
5 Replacement Procedures
Data COMM Cable Replacement
To Next Page
Loading...
Need help?
General
