Cadence (RPM) sensor installation
The Cadence sensor is battery operated and uses a CR2032 lithium coin cell battery.
For instructions to install the cadence sensor, see the Cadence Sensor Installation chapter
in the Operators Guide, see Operator's Guide.
Heart Rate Belt Bluetooth Pairing
For instructions to use and pair a bluetooth heart rate belt, see the Pairing with your Heart
Rate Belt chapter in the Operators Guide, see Operator's Guide.
Service and Maintenance
All information regarding the console installation, operation, service, and maintenance is
provided in the "Spinning Studio Computer" Operator's Guide.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 186
9 Consoles
Spinning® Studio Console
To Next Page
Loading...
