Strong magnetic force
The brake pads have a very strong magnetic force and attraction to the flywheel or any fer-
romagnetic metal object. . The brake pads can easily be ripped from your grasp and
snapped against the metal object damaging the pad. Be very careful to hold the brake pads
tightly when in close proximity to the flywheel during the brake pad removal and installation
procedures.
CAUTION:The magnetic force of the brake pad is very strong and when in close
proximity to the flywheel (or any metal object) will quickly snap the pad against the
flywheel (or other metal) object causing damage to the brake pad magnets. Firmly
hold the magnetic brake pads during removal/installation procedures to avoid
damaging the brake pads.
Incorrect Power measurements
The brake pad-flywheel gap must be calibrated for each installation or whenever it is detec-
ted that the power measurement is incorrectly computed. If the brake pad gap is not cor-
rectly set, the power measurement AutoCal correction will not be correctly determined
causing the resultant Power (watts) measurement to be incorrect. You must use the OEM
magnetic gap fixture tool to properly set the gap at installation. The pads have slotted mount-
ing holes to allow brake pad-flywheel gap adjustment.
Inconstant Power measures
If multiple bikes are not showing similar power (watts) results at common torque and rpm
settings, the bikes most probably have been incorrectly Auto Calibrated, see "Verify the
power (watts) measurement: " on page25.
Specialized Tools
Tool Part Number Qty
Magnetic Gap Fixture
kit*
PPP000000058248101 1*
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 53
5 Replacement Procedures
Brake Pad Replacement
To Next Page
Loading...
Need help?
General
