Brake Pad Replacement
About
This procedure provides instruction to remove and install the magnetic Brake Pads.
The brake pads use opposed magnetic force to vary the flywheel resistance level and integ-
rated caliper strain gauge to calculate the measured power in watts. The brake pads are
mounted on the bottom of the left and right caliper.
Brake pad replacement
The brake pad magnets are north-south polarized and must be replaced as a set to ensure
proper polarization.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 52
5 Replacement Procedures
Brake Pad Replacement
To Next Page
Loading...
Need help?
General
