Precor SPINNER CHRONO POWER User Manual

4.
Then install the rear (left side) belt guard cover , installing the center 4 mm
hex key fastener (1x) first and then the three outer 5 mm hex key fasteners (3x).
See Also
"Replacement Procedures" on page41
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 51
5 Replacement Procedures
Belt Guard Cover Replacement

Precor SPINNER CHRONO POWER Specifications

General

Brand	Precor
Model	SPINNER CHRONO POWER
Category	Exercise Bike
Language	English