Predator 68124 - Engine Operation Lifecycle; Engine Break-in Period Guidelines; Proper Engine Stopping Procedure

Page 10
For Engine technical questions, please call 1-800-520-0882.
SKU 68124
7. Break-in Period:
a. Breaking-in the engine will help to ensure proper equipment and engine operation.
b. The operational break-in period will last about 3 hours of use. During this period:
• Do not apply a heavy load to the equipment.
• Do not operate the engine at its maximum speed.
c. The maintenance break-in period will last about 20 hours of use. After this period:
• Change the engine oil.
Under normal operating conditions subsequent maintenance follows the schedule
explained in the MAINTENANCE AND SERVICING section.
Stopping the Engine
1. To stop the engine in an emergency,
turn the Engine Switch off.
2. Under normal conditions, use the following procedure:
a. Slide the Throttle or Speed Control Lever to SLOW
(the “turtle”).
b. Turn the Engine Switch off.
OFF
OFF