Base assembly:
Select preferred pole I, J or K depending on target and local condi-
tions (see previous page for more information).
Secure all bolts tightly.
Base placement:
When the base is assembled put it in your preferred location. Anchor
it to the ground with the stakes.
Learn more about the optimal placement on page 9.
Assemble CO
2
engine and attach gas regulator on hose:
Connect CO
2
engine on pole. Attach the gas regulator on the
hose and secure it with the hoseclamp.
WARNING: The tubing or the flexible hose must be changed
within the prescribed intervals.
X: Check leak point (See “Checking for Leaks” page 10).
To Next Page
Loading...