How to fix a Prem-I-Air EH1920 that is not operating?
If your Prem-I-Air Air Conditioner isn't turning on, make sure the power cord is securely plugged into the wall outlet. Also, check and empty the drain pan by removing the rubber plug. Lastly, ensure that the operating temperature is within the range of 5-35 degrees Celsius.
Why is my Prem-I-Air EH1920 working with reduced capacity?
If your Prem-I-Air Air Conditioner's performance is weak, start by cleaning the air filter. Clear any obstructions around the unit. Ensure doors and windows are closed. Verify the mode and temperature settings are correct per the manual, and that the exhaust hose is securely attached.
What to do if Prem-I-Air EH1920 Air Conditioner shows E1 error?
If your Prem-I-Air Air Conditioner displays error code E1, it indicates an ambient temperature sensor failure. Check the sensor connection, clean it, or replace it.
What to do if Prem-I-Air Air Conditioner shows E2 error?
If your Prem-I-Air Air Conditioner displays error code E2, it means there are coil temperature sensor failures. Inspect the sensor connection, and clean or replace the temperature sensor.
How to stop water leakage from Prem-I-Air Air Conditioner?
To prevent water leakage from your Prem-I-Air Air Conditioner, empty the water tank before moving it. Also, straighten the hose to prevent any water traps from forming.
Why is my Prem-I-Air Air Conditioner making excessive noise?
If your Prem-I-Air Air Conditioner is making too much noise, place it on a level, firm surface. Make sure all parts are tightened securely. Note that some noise from flowing refrigerant is normal.
What does E0 error mean on a Prem-I-Air Air Conditioner?
If your Prem-I-Air Air Conditioner displays error code E0, it indicates communication faults between the main PCB and the display PCB. Check the wire harness of the display PCB for any damage.
Inspect product for damage, ensure it's upright, wait 3 hours post-unpacking, and install batteries.
Essential safety rules for operation, installation, and child supervision.
Visual guide identifying and labeling the main parts of the air conditioner.
Step-by-step instructions for connecting the exhaust hose and window kit.
Detailed explanation of the control panel buttons and display indicators.
Explains the functions and operation of the buttons on the remote control.
Details on how to use Cool, Fan, Dry, and Sleep modes.
Instructions for setting delay start and delay stop timers.
Explanation of the automatic defrost sequence and conditions.
Information on compressor protection during power fluctuations.
Guidance on managing condensate water, especially in drying mode.
Instructions for cleaning the air filter to maintain airflow and unit efficiency.
Recommendations for proper storage to preserve the unit's condition.
Lists common symptoms, inspections, and solutions for unit problems.
Guidelines for periodic testing and general safety advice.
Guidance on safety testing, especially in office environments.
Information on the estimated electricity cost for running the appliance.
Guidance on responsible disposal of the appliance.
Details product code, capacity, power, noise levels, and dimensions.
Information on product warranty, retailer support, and help desk contact.
General| Type | Portable Air Conditioner |
|---|---|
| Power | 220-240 V |
| Speeds | 3 |
| Oscillation | Yes |
| Remote Control | Yes |
| Operating Voltage | 220-240 V |
| Operating Frequency | 50 Hz |
To Next Page