How to fix a Prem-I-Air Air Conditioner that won't turn on?
If your Prem-I-Air Air Conditioner unit isn't working, there could be a power supply fault. Check if it's plugged in correctly, if the plug or socket is faulty, or if the fuse is broken. Plug it in correctly, change the plug or socket, or replace the fuse.
What to do if my Prem-I-Air Air Conditioner is not cooling?
If, in cooling mode, no cooling air is coming out of your Prem-I-Air Air Conditioner, it could be because the room temperature is lower than the set temperature, which is normal. Alternatively, there might be frost on the surface of the evaporator. In this case, the unit is defrosting and will resume running once defrosting is finished.
How to fix error code 'E2' on Prem-I-Air Air Conditioner?
To fix the 'E2' error code on your Prem-I-Air Air Conditioner, you should change the indoor temperature sensor.
Why is my Prem-I-Air Air Conditioner remote not working?
If your Prem-I-Air Air Conditioner's remote control isn't working, the batteries may be exhausted or installed incorrectly. Try changing the batteries or re-installing them correctly.
Why does my Prem-I-Air Air Conditioner keep turning off?
If your Prem-I-Air Air Conditioner stops running automatically, it may be because the timer is set, or the room temperature is lower than the set temperature. You can close the timer or reset the temperature.
What to do if my Prem-I-Air Air Conditioner won't start immediately?
If your Prem-I-Air Air Conditioner does not work for 3 minutes when switched on, it's due to the unit's protection mechanism. Wait approximately 3 minutes, and the unit will start.
What does error code 'E6' mean on Prem-I-Air Air Conditioner?
To address the 'E6' error code on your Prem-I-Air Air Conditioner, check if the refrigerant is leaking or missing.
What does error code 'E4' mean on Prem-I-Air Air Conditioner?
To resolve the 'E4' error code on your Prem-I-Air Air Conditioner, replace the indoor coil sensor.
Lists the standard accessories included with the air conditioner unit.
Guidance on optimal unit placement for maximum performance and to avoid installation issues.
Instructions for correctly using the wall drilling template to ensure accurate hole placement.
Detailed steps for drilling wall holes for intake, outlet, and drainage with proper inclination.
Procedures for fitting the hot air discharge and air intake vent tubes through the wall.
Instruction to remove filter securing screws before mounting the unit onto the bracket.
Steps for securely mounting the air conditioner unit onto the previously installed wall bracket.
Instructions for assembling the castor kit to enable mobile unit functionality.
Guidance on installing window kits for efficient exhaust of hot air from portable units.
Steps for attaching the exhaust hose, grille, and window adapters for portable installation.
Reminder to secure filter screws for portable unit operation and during cleaning procedures.
Overview of the unit's control panel, including buttons and display indicators.
Step-by-step guide to setting the real-time clock on the remote control.
Detailed explanation of the various functions and buttons on the remote controller.
Procedures for cleaning or replacing the air filter to maintain optimal airflow and performance.
Guidelines for cleaning and maintaining the exterior casing of the air conditioner.
Instructions for properly preparing and storing the unit for extended periods or for transport.
General| Type | Portable Air Conditioner |
|---|---|
| Cooling Capacity | 8000 BTU |
| Operating Voltage | 220-240V |
| Operating Frequency | 50Hz |
| Refrigerant | R290 |
| Features | Remote Control, Timer, Dehumidifier |
| Air Flow | 300 m3/h |
To Next Page