Most operational problems can be avoided by regular care and preventative maintenance.
Taking regular care of the machine will significantly increase its lifetime.
To avoid problems, make sure there are no metal clips or rubber bands in the bills being
counted. Be sure to follow the proper procedure for loading the hopper.
For best results, it is recommended that to use an air duster and a soft bristle brush to remove
any dust or debris from the interior of the unit. When not using the machine for an extended
period time, cover it with a dust cover (not included with the unit) to prevent dust from settling
inside.
All parts of the machine need daily care and cleaning. Pay close attention to the sensors,
which are delicate components. If any dust or other foreign matter adheres to the sensors, it
may cause various problems during operation of the machine.
• To avoid malfunction caused by foreign objects, please clean your machine every day.
• Open back cover and clean sensors with the provided bristle brush or a dry cloth frequently.
• Clean top cover and CIS with provided bristle brush or a dry cloth frequently.
To Previous Page
Loading...
Need help?
General