Why is my Premier Range Ventilation Hood not sucking?
If your Premier Range Ventilation Hood isn't providing enough suction, first ensure the distance between the hood and your cooker is between 650mm and 700mm. Also, the filters may be saturated. Clean them of grease residue and replace them after they are dry.
What to do if my Premier Range H97.10SB Ventilation Hood is vibrating?
If your Premier Range Ventilation Hood is vibrating, it could be due to a damaged or unbalanced propeller, in which case you should call for technical service. Alternatively, the hood may not be installed correctly. Review the installation instructions and check the installation again for any loose screws, brackets, or connections.
How to fix a Premier Range Ventilation Hood when the light is on, but the motor doesn't work?
If the light is on but the motor of your Premier Range Ventilation Hood isn't working, the outlet valve may be blocked. Detach the flue and duct, then turn on the hood to check if the valve opens. If the valve is not the problem, the capacitor or the control switch may have failed, and you should call for technical service.
What to do if the light and motor don't work on my Premier Range H97.10SB Ventilation Hood?
If the light and motor of your Premier Range Ventilation Hood aren't working, first, ensure there is a power supply by plugging another appliance into the socket. If there is power, the fuse may have blown. Open up the plug and replace the 13A fuse.
General| Model | H97.10SB |
|---|---|
| Material | Stainless Steel |
| Number of Fan Speeds | 3 |
| Noise Level | 65 dB |
| Lighting | LED |
| Installation Type | Under Cabinet |
| Width | 30 inch |
| Filter Type | Baffle |
To Next Page