If any problem occurs, please detach the plug from the
socket and contact the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
Problem Cause Solution
Light on, but motor
does not work
The outlet valve is blocked Detach flue and duct then
turn on the hood to check if
the valve opens
The capacitor has failed Call for technical service
The control switch has
failed
Call for technical service
Light does not work,
motor does not work
No power supply Plug another appliance into
the socket to confirm there is
power supply
Fuse has blown Open up the plug and replace
the 13A fuse
Vibration The propeller is damaged or
unbalanced
Call for technical service
The hood is not installed
correctly
Review the installation in-
structions & check the instal-
lation again for loose screws,
brackets or connections
Insufficient suction
effect
The distance between the
hood and the cooker is too
far
Check that the distance is
between 650mm to 700mm
The filters are saturated Clean the filters from grease
residue and replace after
drying.
Troubleshooting
To Next Page
Loading...