• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and
a indicator next to the key will flash.
For Model PT-PC2I
4. Select a heat setting by touching the ”-“ or “+” control.
• If you don’t choose a heat setting within 1 minute, the Induction hob
will automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
For Model PT-PC4I
4. Set a power level by touching the “-”, “+”, or slide along the “—”control,
or just touch any point of the “—”.
Or
Or
To Next Page
Loading...
