Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zones.
2. Touch timer control, the minder indicator
will start flashing and “30” will show in the
timer display.
3. Set the time by touching the “-“ or “+” control
of the timer.
Hint: Touch the “-“ or “+” control of the timer
once to decrease or increase by 1 minute.
Touch and hold the “-“or ”+” control of the timer to decrease or increase
by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. Touch the ‘Timer’, the timer is cancelled, and the”--“will show in the minute
display.
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer indicator
shows “- - “ when the set time finished.
To Next Page
Loading...