P-21
P-20
P-19
P-22
Use the Memory Function
To read the memory values
To clean out the memory values
Blood Circulation
About Blood Pressure
Exceptional Situations
About Blood Pressure
In the memory reading mode,press the memory button to view
the latest value to the earliest value.Press the setting button to
view the earilest value to the latest value.
Press and hold the memory button in the memoty reading mode,
then press the start/stop button for 3～4 second.
The blood circulation is responsible for supplying the body with oxygen.
Blood pressure is the pressure exerted on the arteries.
The systolic blood pressure value (higher pressure or top value) represents
the blood pressure produced by contraction of the heart muscle.
The diastolic blood pressure value (lower pressure or lower value)
represents the blood pressure produced by relaxation of the heart muscle.
Diastolic Blood PressureSystolic Blood Pressure
Lower pressure
Relaxation of the
heart muscle
Pressure decreased
to the blood vessel
Blood return heart
Higher pressure
Contraction of
the heart muscle
Pressure increased
to the blood vessel
Extrude blood
Diastolic Blood Pressur (mmHg)
After each measurement is completed, the LCD display will show your
position automatically on the six segments of the bar indicator which
corresponds to WHO Blood Pressure Indicator.
Classification of Blood Pressure
Optimal
blood pressure
(target value)
Normal blood pressure
Normal systolic value
Mild hypertension
Moderate hypertension
Severe hypertension
WHO
Red
Yellow
Blue
Systolic Blood Pressure (mmHg)
*Note!
When a person’s systolic and diastolic pressures fall into different categories,
the higher category should apply.
Replace all of the worn batteries
with two new ones.
rap the cuf
Inflate over again after ensuring.
Measure over again according to
correct way
Do not move your arm and body
and keep quiet.
When the batteries
power are too low
The course of
inflating appears
error
When measurement
fails.
CorrectionCauseSymbol
The following symbol will appear on the display when measuring abnormal.
Error Indicators
To Next Page
Loading...