P-10
P-9
P-8
P-7
Battery Installation / Replacement
Initialization
Initialization
Use two identical 1.5V alkaline batteries type AAA
LR03.
Replace all of the batteries if the symbol of low
battery appears on the display.
Never leave any low battery in the battery
compartment since they may leak and cause
damage to the unit.
The mark of year appears and flashes after long pressing the
setting button for 3～4 seconds.
The year can be set between 2008 and 2030, and it will return
to 2008 when the display of year up to 2030.
Press the memory button to change the month and press the
setting button to confirm the month.
Then set the day,the hour and the minute by using the same way.
Month Setting Day Setting
Hour Setting Minute Setting
Then press the memory button one time for increasing one year,
twice for two years,so on and so forth.
Finally, pressing the setting button again to confirm year and
start to enter the setting of date .
Caution!
Replace the battery cover
Initialization settings include user setting,year/date/time setting,
and unit setting.
The unit stores automatically 180 sets measurement values for 2
users (2*90) with the date and time.Set all of the parameters well
before taking a measurement for the first time, otherwise the unit
will display the default values by the system.
To select user
To set year
To set date and time
The mark of a user will appear when pressing the setting button.
then press the setting button again to change the current user.
Finally, pressing the Start/Stop button to comfirm user and tum off.
To Next Page
Loading...