Premier P7200 User Manual

RapidFOLD
INSTRUCTION MANUAL
Model P7200 (110V)
Model P720022 (220V)
Your machine comes with the following
components:
A. RAPIDFOLD FOLDING MACHINE
B. PAPER GUIDES (2)
C. FRONT FOLD TABLE
D. BACK FOLD TABLE
E. METAL BRACKETS (2)
F. EXIT TRAY CONNECTOR SET (3)
(exit tray connectors contain
3 top plastic pieces,
3 bottom plastic pieces, and
6 connector screws)
A
F
E
C
D
Martin Yale industries • Wabash, IN 46992
Phone (260)-563-0641 • Fax (260)-563-4575
www.martinyale.com • Made in Taiwan
SPECIFICATIONS
• Folds 8.5” x 11” or A4 size paper
• Creates four different folds
• Operates at a speed of 4000 sheets/hr
• Accepts 16-28 lb. bond paper (60-105 gsm)
• Folds 1 sheet at a time automatically, or up to
3 sheets at a time manually
WARNING! Never connect power to the folder until you
are ready to set up and operate the machine. During set
up, operation, and maintenance keep hands, hair, loose
clothing, and jewelry away from all moving parts. Serious
bodily injury could result. Service or disassembly of fold-
er should only be attempted with the power disconnected.
B

Premier P7200 Specifications

General

Brand	Premier
Model	P7200
Category	Folding Machines
Language	English

Summary

Warning and Safety Precautions

Assembly and Setup

Aligning the Paper Guides

Instructions for positioning paper guides for optimal paper feeding and to prevent pinching or skewing.

Fold Table Operations

Adjusting the Fold Tables

Guidance on setting fold tables for different fold types and paper sizes, including factory presets.

Double Fold Operation

Steps to perform double folds like letter and Z-folds, requiring two fold tables.

Half Fold Setup

Procedure for reversing and re-inserting the back fold table to perform a half fold.

Paper Feeding Procedures

Automatic Feeding of Single Sheets

Steps for clean automatic paper feeding of up to 50 sheets.

Hand Feeding of Sets

Instructions for manually feeding multiple sheets (up to 3) to prevent jams.

Troubleshooting

Paper Jams

Methods for clearing paper jams, including unplugging and using tools.

Feeding Errors

Solutions for paper not feeding correctly, related to guides, alignment, or worn parts.