Electric bicycles are very similar to ordinary bicycles. The setup and maintenance is
mostly the same. Most bicycle shops will happily assist you if help is needed. The motor
is there as an assistant when riding to make the journey more enjoyable and
comfortable. It is not to be relied on solely to power your ride. Please read this guide
before assembling the bike, especially for steps such as attaching the pedals and
wheels as doing so incorrectly can damage your bike. Any questions please feel free to
contact us directly.
Items in carton:
When you open the carton, please check if the following items are inside. If not,
please let us know immediately by emailing hello@premiobikes.com
Electric bicycle 1 pc
Charger 1 pc
Pedal 1 pair
Safety:
This is a short guide to get you up and riding quickly. Please consult the manual for full
safety instructions before riding. A few quick tips:
• Always wear your helmet, gloves and other protective gear before riding to protect
yourself from damage in case of an accident. It is Australian law that you must wear
your helmet at all times.
• Max load: the max load of the electric bike is 120kg.
• Do not dispose of the battery as it is environmental pollution. Instead take it to a
electronic recycling facility. Usually car accessory shops such as Repco in Australia are
able to recycle batteries.
1. Basic structure and component names
To Next Page
Loading...