8
OPERATION METHODS
COOLING MODE
·After machine turns on, default value is cooling mode with 22℃ and low fan speed.
·Press “ MODE” to select cooling mode, cooling mode indictor turns on .
·Press “ UP” or “ DOWN” to adjust temperature ( from 16℃ to 31℃).
·Press “ FAN” to select high or low fan speed.
FAN MODE
·Press “ MODE” to select fan mode, fan mode indicator turns on .
·Press “ FAN” to select high speed or low speed.
·Temperature and sleeping function cannot be setup.
TIMER MODE
·Under standby mode, press “TIMER” to setup the power-on time. Timer indicator turns on.
·Under power-on mode, press “TIMER” to setup power-off timer. Timer indicator turns on.
DEHUMIDIFYING MODE
·Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns on .
·Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
SLEEPING MODE
· Press key “SLEEP” enter into sleeping mode, default value of fan speed is low.
· When sleeping mode turns on , under cooling mode, the first one hour later, setting
temperature will go up 1℃, the second one hour later, setting temperature will go up
another 1℃, and then keep the same .
· Sleeping mode is invalid under dehumidifying and fan mode. Under water full, machine
standby and mode conversion, sleeping mode will be cancelled .
COMPRESSOR PROTECTION
·Three minutes later after power on / restart, compressor starts to run.
To Next Page
Loading...
