Need help?Do you have a question about the PRESIDENT GRANT CLASSIC and is the answer not in the manual?
Warning: Never transmit without a connected antenna or correct SWR to prevent amplifier damage.
Guidance on selecting a suitable location and securely mounting the CB radio in a vehicle.
Instructions for selecting and installing mobile or fixed antennas for optimal performance.
Steps for connecting the CB radio to a 12V power supply and polarity checks.
Basic steps before transmitting, including connecting mic, checking antenna, and setting volume/squelch.
Procedure for calibrating the Standing Wave Ratio (SWR) for safe and efficient transmission.
How to turn the radio on, adjust volume, and use the squelch for noise reduction.
Choosing between AM, FM, LSB, and USB modes for communication.
Understanding the channel display, S/RF meter, and RX/TX indicators.
Using BRITE/DIMMER, BEEP, CLARIFIER, COARSE, RF GAIN, and MIC GAIN controls.
Selecting channels, using the microphone, and activating transmission with PTT.
Detailed specifications covering general, transmission, and reception parameters of the radio.
Guidance on resolving issues like no transmission, poor reception, or power failures.
Instructions on how to transmit messages, receive replies, and manage communications.
Definitions of CB radio terms and the international phonetic alphabet for clear communication.
Lists of CB channels with frequencies and a diagram for the 6-pin microphone connector.
Information on particular country restrictions, licenses, or registration requirements for CB radio use.
To Next Page
General