• Always keep the Test Pad free from dust and replace
the Protective Cover immediately after use.
• Do not use the tester when “Low Batt” indicator
appears. Change to new batteries before performing
any test.
• Do not leave worn out or dead batteries in the battery
compartment as they may corrode, leak or damage
the tester. Batteries should be removed when the
tester is to be stored for an extended period of time.
Your tester is a product of extensive design and
craftsmanship and should be treated with care.
Thank you for taking time to go through the user
handbook which will enable you to understand your
recent purchase better.
Presidium also recommends that you register your warranty
by sending the warranty registration card to us or
registering online at http://www.presidium.com.sg/
4. TAKING CARE of your Presidium Refractive Index
Meter II
18
To Next Page
Loading...