14
3 Connecting to a Computer
3.3 Using the Studio-series interfaces with Popular Audio Applications
STUDIO26c and STUDIO68c
Owner’s Manual
Apple Logic Pro/Express 7+:
1. Launch Logic Pro/Express.
2. Go to Logic | Preferences | Audio.
3. Click on the Devices Tab.
4. On the Core Audio tab, check Enabled.
5. Select your Studio-series interface from the device menu.
6. You will be asked if you’d like to relaunch Logic. Click “try (re)launch.”
7. Your Studio-series interface features custom I/O labels for faster work flow.
To enable these labels for use in Logic, go to Options | Audio | I/O Labels.
8. The second column in the pop-up window will be named
“Provided by Driver.” Activate each of these labels for your Studio-
series interface. When you are done, close this window.
9. You are now ready to use your Studio-series interface.
Avid Pro Tools 9+
1. Launch Pro Tools.
2. Got to Setup | Hardware and select your Studio-series
interface from the Peripherals list. Click OK.
3. Go to Setup | Playback Engine and select your Studio-series
interface from the menu at the top of the window. Click OK.
Cakewalk Sonar 6+
1. Launch Sonar.
2. Go to Options | Audio... and click on the Advanced tab.
3. Change the Driver Mode to “ASIO.”
4. Click the “OK” button.
5. Restart Sonar.
6. Go to Options | Audio... and click on the Drivers tab.
7. Highlight all input and output drivers beginning
with your Studio-series product name.
8. Go to Options | Audio... and click on the General tab.
9. Set the Playback Timing Master to “[Studio-series model] ... DAW Out 1.”
10. Set the Recording Timing Master to “[Studio-series model] ... DAW Out 2.”
To Next Page
Loading...
